Monza Low Downforce Setup

There is no circuit in F1 that looks simpler than Monza, a typical circuit dominated by long straights. In response to this, downforce is not that favourable here, on the contrary, low downforce setup aiming to reduce drag is the key to win the race.

Front Wing

Front wing is not often changed significantly from race to race as it is the part that determines downstream flow, therefore affecting the design of all following parts. However, for Monza, most teams have adjust their front wing by removing cascades, lower down AoA or reducing chord length.

McLaren has removed all the outer cascades and replaced their 2-section upper flap with one single upper flap.

Source: Formula1.com

McLaren Front Wing Change from Spa to Monza

Source: Sutton Image

McLaren Front Wing in Monza

Another noticeable change on front wing is from Ferrari, who has removed all the small upper cascades and made several changes to the flaps and endplates profile.

Source: Formula1.com

Ferrari Front Wing Comparison from Spa to Monza

Rear Wing

The rear wing design is closely related to exhaust/cooling, sidepod and rear diffuser. Teams have different adjustments based on their cars. Major methods to reduce downforce/drag in Monza includes slimming rear wings, introducing V-shape profile and use gurney flap on diffusers.

With Massa hitting 3rd in qualifying and Alonso finishing on podium from 10th start, Ferrari proved their speed in Monza. They modified the beam wing with a V-cut profile and slimmed outer span, fit gurneys along the trailing edge of the diffuser, and quite uniquely, added flaps above and below the diffuser. The V-cut supplies the car with enough downforce at corners with low downforce setup for straights. Use of gurneys and additional flaps help regulating the flow, correspondingly reducing drag.

farrari monza rear design
Source: ScarbsF1

Ferrari Rear Design for Monza

Similar to Ferrari, Red Bull also used a V-shaped beam wing, in combination with a rear wing of very small AoA. They’re among the teams that suffer the most from the ban of exhaust blown diffuser this year and quite obviously still haven’t found a ideal design for their underbody rear part. In Monza, they’ve also added an additional tier to the diffuser gurneys, though that didn’t seem to give them clear benefit.

Red Bull V-shaped Beam Wing

Source: Sutton Image

Additional Tier on RB8 Diffuser Gurney

As the low downforce rear wing has clearly given Button huge advantage in Spa, McLaren is quite happy using this setup for both cars in Monza with a few modifications to further reduce drag. Instead of slimming the wing as other teams, McLaren cleverly introduced a curved profile at the tip of their beam wing to smooth air flow.

Source: ScarbsF1

McLaren Rear Design for Monza – Note Curved Tips on Beam Wing

Lotus has drawn wide attention because of their so-called DDRS system – It’s still quite confusing how people call this device though. Anyway we’re not seeing it until Singapore since Monza is not a preferable circuit for this system. In Monza, Lotus runs on the shortest chord rear wing, which makes it look quite tiny from behind.

Source: F1 Technical

Lotus Rear Design for Monza

Check this post from ScrabsF1 for more detailed analysis of rear end design based on each car relating exhaust/cooling/sidepod to rear wing assembly.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s